Emblaser 2 Laser Cutter & Engraver

View Brochure | Darkly Labs Blog | Example Projects
Request Sample

Perfect for the classroom

Designed, engineered and proudly made in Australia, the Emblaser 2 is the second generation desktop laser cutter and engraver that is a perfect combination of ease-of-use, size, power and price. Designed to be user friendly, easy to setup, safe and easy to use in any classroom.

So many materials

The Emblaser 2 can cut, mark or engrave cloth, cardboard, paper, leather, wood, plastics and so much more.

Safety first

Traditionally laser cutters have only been available for specialized learning areas, but the Emblaser 2 is a Class 1 laser making is safe to use in any classroom when combined with it’s air filtration unit.

The AS/NZS IEC 60825 classification divides lasers into 6 classes, with 6 being the highest and most harmful. The Emblaser 2 is a Class 1 device considered the safest and does not permit human access to laser radiation during operation.

Give depth to your work

A true 3D cutting & engraving machine, the Emblaser 2 allows you to achieve different levels of depths and details.

It gives your piece that extra dimension by giving you the control to adjust the height of the laser while cutting. Cut through thicker materials by setting your laser to automatically lower with multiples passes.

Samples

Videos

Safety

Material ignition alert. Inbuilt fume extractor to vent fumes outdoors or add the Fume Filter System to safely filter fumes for indoor use.

Precise Alignment

Use the built-in camera to overlay your design onto your project. Take out the alignment guesswork

3D Engraving

Create stunning 3D engravings with depth or adjust sharpness to create sharp lines or soft fills with the automatic Z axis of the head.

Commonly Used Materials

CATEGORY	MATERIAL	CUT (5W Laser) (mm)	CUT (10W Laser) (mm)	ENGRAVE	COMMENTS
Fabric	Denim	Y	Y	Y
Fabric	Felt	Y	Y	N	All colors except white.
Fabric	General Fabric	Y	Y	Y
Leather	Leather	1.00	3.50	Y	Treatment & color dependent.
Metal	Anodized Aluminium	N	N	Y
Metal	Stainless Steel	N	N	Y	Engraving possible with coating (see Spectrumark).
Other	Slate	N	N	Y
Paper	Card	1.00	1.50	Y
Paper	Corrugated Cardboard	4.00	6.00	Y
Plastic	Acrylic (Blue)	N	N	Y
Plastic	Acrylic (Green, Red, Yellow, Black)	3.00	3.00	Y
Plastic	Acrylic (Transparent)	N	N	Y	Engraving possible with coating.
Plastic	Acrylic (White)	N	2.00	Y
Plastic	EVA Foam	5.00	10.00	N
Plastic	Laser Contact Film (Any Color)	Y	Y	N	Only ECM range safe for laser cutting.
Plastic	Modeling Foam	N	3.00	N
Plastic	Polypropylene (Black, Red, Yellow, Green)	1.00	2.00	Y
Plastic	Polypropylene (Blue, White)	N	N	N
Rubber	Stamp Rubber (Laser)	N	2.30	Y
Rubber	Synthetic Rubber	1.00	2.00	Y
Wood	Balsa	6.00	10.00	Y
Wood	Cork Board	N	4.00	Y
Wood	Hardwood Oak	2.00	6.00	Y
Wood	MDF	3.00	6.00	Y	Cutting dependant on composition and moisture content.
Wood	Pine	3.00	8.00	Y
Wood	Plywood (Bamboo-Laser)	N	5.00	Y
Wood	Plywood (Birch-Laser)	N	3.00	Y
Wood	Plywood (Eucalyptus-Laser)	2.50	2.50	Y
Wood	Plywood (Generic)	3.00	3.00	Y
Wood	Plywood (Jarrah-Laser)	3.00	3.00	Y
Wood	Plywood (Poplar-Laser)	6.00	6.00	Y

Technical Specifications

Dimensions	540mm x 720mm x 200mm (21.25″ x 28.35″ x 7.8″)
Material Capacity	500mm x 300mm x 50mm (19.66″ x 11.81″ x 1.97″)
Optics – Focus	Factory pre-focused
Laser Unit Type	Equivalent to 15-20 watt co2 laser
Classification	Class 1 — The safest laser device rating available.
Cooling	Air-cooled — No water pump required
Hardware	• 3D Cutting & Engraving, fully software controlled • Air-Assist System installed • Camera for material alignment
Connectivity	Wifi & USB
Fume Extraction	Built-in fan and external hose
Lighting	Internal Workspace
Software	LightBurn (PC/Mac)
Warranty	• 1-Year Limited Warranty • 3-Year Warranty on Laser Diode